View LM300WQ3-STA1_7254883.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 specification for approval s.g.hong / g.manager ( ) preliminary specification ( )final specification *when you obtain standard approval, please use the above model name without suffix signature date / please return 1 copy for your confirmation with your signature and comments. product engineering dept. lg. philips lcd co., ltd approved by date reviewed by prepared by john.kim / manager title 30 wqxga tft lcd buyer model supplier lg.philips lcd co., ltd. *model lm300wq3 suffix sta1 / / d.y.kim / engineer pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 2/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 no. item page - cover 1 - contents 2 - record of revisions 3 1 general description 4 2 absolute maximum ratings 5 3 electrical specifications 6 3-1 electrical characteristics 6 3-2 interface connections 8 3-3 signal timing specifications 12 3-4 signal timing wave forms 14 3-5 color input data referance 15 3-6 power sequence 16 4 optical specifications 18 5 mechanical characteristics 23 6 reliability 26 7 international standards 27 7-1 safety 27 7-2 emc 27 8 packing 28 8-1 designation of lot mark 28 8-2 packing form 28 9 precautions 29 contents pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 3/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 record of revisions first draft 11 th oct, 2006 ver.0.1 description page data revision no pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 4/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 1. general description general features figure 1. block diagram the lm300wq3 lcd is a color active matrix liquid crystal displaywith an integral cold cathode fluorescent lamp(ccfl) back light system. the matrix employs a-si thin film transistor as the active element. it is a transmissive type display operating in the normally black mode. this tft-lcd has a 30.0 inch diagonally measured active display area with wqxga resolution(2560 vertical by 1600 horizontal pixel array). each pixel is divided into red, green and blue sub-pixels or dots which are arranged in vertical stripes. gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus, presenting a palette of more than 16,777,216 colors. the lm300wq3 has been designed to apply the dual tmds tm (transition minimized differential signaling) as the interface method to enables a simple and low-cost implementation in both the host and monitor. hard coating (3h), anti-glare treatment of the front polarizer surface treatments 2560 horizontal by 1600 vertical pixels. rgb stripe arrangement pixel format 0.2505 mm x 0.2505 mm pixel pitch 8-bit, 16,777,216 color color depth viewing angle free(r/l 178(typ.), u/d 178(typ.)) viewing angle(cr>10) 300 cd/m 2 ( 1 point center) luminance, white 5100 g (typ.) weight total 116.74 watt(typ.), (16.74 watt @v lcd , 100.0w @300cd/) power consumption transmissive mode, normally black display operating mode 677.30(h) x 436.80(v) x 42.30(d) mm(typ.) outline dimension 30.0 inches (756.228mm) diagonal active screen size tmds receiver (master) tmds receiver (slave) source d- ic(left) 1 2560 1600 back light assembly (16ccfl) 1600 +24.0v inverter 2pin x 8cns (high) 2pin x 1cns (low) 1 1 power block (v cc ,v dd ,v gh , v gl ,gamma,v com ) dual link tmds rx rx0~2,c rx3~5 dclk h,v,de qe qo dsel pwr on spread spectrum vcc vcc v cc ,v dd ,v gh , v gl ,gamma,v com source d- ic(right) g a t e d - i c ( r i g h t ) mini lvds signal(left) mini lvds signal(right) control signal (source/gate) g a t e d - i c ( r i g h t ) tcon signal c n 1 c n 2 c n 3 pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 5/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 2. absolute maximum ratings the following are maximum values which, if exceeded, may cause faulty operation or damage to the unit. 90% 10 20 3040 50 607080 0 -20 0 10 20 30 40 50 dry bulb temperature [c] wet bulb temperature [c] storage operation h u m i d i t y [ ( % ) r h ] 10% 40% 60% 60 figure 2. temperature and relative humidity table 1. absolute maximum ratings 1 at 25 2 c notes %rh %rh v dc units 90 90 60 50 21.0 max. 10 10 -20 0 -0.3 min. values v lcd power supply input voltage for panel t op operating temperature h op operating ambient humidity t st storage temperature h st storage humidity symbol parameter note : 1. temperature and relative humidity range are shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 6/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 3. electrical specifications 3-1. electrical characteristics table 2. electrical characteristics [ figure 3 ] mosaic pattern : for power consumption measurement it requires two power inputs. one is employed to power the lcd electronics and to drive the tft array and liquid crystal. the second input power for the ccfl, is typically generated by an inverter. the inverter is an external unit to the lcds. mv p-p 400 v drf permissive power input ripple 1 1070 930 790 1 watt 19.26 16.74 - p lcd power consumption 3 a 4 - - i rush rush current vdc 19.0 18.0 17.0 v lcd power supply input voltage 2 1715 1320 - i lcd power supply input current module : parameter symbol max typ min notes unit values note : 1. the specified current and power consumption are under the v lcd =18.0v, 25 2 c,f v =60hz condition whereas mosaic pattern(8 x 6) is displayed and f v is the frame frequency. 2. the current is specified at the maximum current pattern. 3. the duration of rush current is about 2ms and rising time ofpower input is 1ms(min.). mosaic pattern(8 x 6) white : 255gray black : 0gray maximum current pattern white pattern pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 7/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 table 3. inverter electrical characteristics lamp : 3 hrs 40,000 life time 2 2 1 notes max. typ. min. v 26.4 24.0 21.6 v bl input voltage v 0.8 - 0.0 lamp off =low v 3.3 - 0 v br brightness adj v 5.0 - 2.0 lamp on = high v on/off b/l on/off control watt (115) (100) v br = 3.3v p bl input power a (4.80) (4.17) v br = 3.3v i bl input current inverter : unit values condition symbol parameter notes : 1. the input voltage ripple is limited below 400mvp-p. 2.the specified current and power consumption are under the typical supply input voltage, 24v. 3.the life is determined as the time at which luminance of the lamp is 50% compared to that of initial value at the typical lamp current on condition of continuousoperating at 25 2 c. 4. electrical characteristics are determined after the unit has been on and stable for approximately 30min in a dark environment at 25 c 2 c. pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 8/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 3-2. interface connections this lcd employs three kinds of interface connections. a 30-pin connector is used for tmds signals from the host computer. a 15-pin connector is used for lcd module power and lcm controls signal from external monitor control circuits. and 14-pin connector is used for the inverter for backlight system. table 4. 30pin connector pin configuration(for dual link tmds) notes : 1. interface chips : sii1169 x 2ea (dual tmds receiver ,silicon image) 2. connector 2.1 connector(receptacle) : kdf71g-30s-1h(hirose) or fi-xl30ssl-hf(jae) or equivalent. 2.2 mating connector(plug) : fi-x30h and fi-x30hl or its equivalent. 3. 28,29 pins are only used in lcm manufacture. nc reserved(hdcp_dat) reserved(hdcp_clk) nc nc tmds negative differential output(channel 3) tmds positive differential output(channel 3) shield for tmds channel 3 tmds negative differential output(channel 4) tmds positive differential output(channel 4) shield for tmds channel 4 tmds negative differential output(channel 5) tmds positive differential output(channel 5) shield for tmds channel 5 tmds negative differential output(channel c) description nc nc nc nc nc rx3- rx3+ shld3 rx4- rx4+ shld4 rx5- rx5+ shld5 rxc- symbol 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 pin no. tmds negative differential output(channel 2) rx2- 7 tmds positive differential output(channel 1) rx1+ 9 shield for tmds channel 0 shld0 11 tmds positive differential output(channel c) rxc+ 15 shield for tmds channel c shldc 14 tmds negative differential output(channel 0) rx0- 13 tmds positive differential output(channel 0) rx0+ 12 tmds negative differential output(channel 1) rx1- 10 shield for tmds channel 1 shld1 8 tmds positive differential output(channel 2) rx2+ 6 shield for tmds channel 2 shld2 5 nc nc 4 nc nc 3 nc nc 2 nc nc 1 description symbol pin no. 3-2-1. signal interface the dual tmds signal interface connector is kdf71g-30s-1h(manufactured by hirose) or fi-xl30ssl-hf(manufactured by jae)or equivalent. the pin configuration for the 30 pin connector is shown in the table below. pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 9/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 table 5. 15pin connector pin configuration (power connector cn1) 3-2-2.power connector the power connector is 53261 (manufactured by molex) or equivalent. the pin configuration for the 15 pin connector is shown in the table below. 3.0 ~ 5.0v notes gnd vsync output hsync output auto generating pattern hdcp_data ground lcm power supply, +18v 5% lcm power supply, +18v 5% lcm power supply, +18v 5% lcm power supply, +18v 5% ground lcm on control signal input description gnd vs_out hs_out agp hdcp_dat hdcp_clk gnd v lcd v lcd v lcd v lcd gnd pwr_on symbol 4 2 15 14 13 12 11 10 9 8 7 6 5 3 1 pin notes : 1. connector 1) connector(receptacle) : 53261 (molex) of equivalent. 2) mating connector(plug) : 51021 or its equivalent. 2. agp function is only recommended at assembly burn in mode. at running agp, refresh time is about 40 ~ 60hz hdcp_clock 3.3v (note 2) scl_eq sda_eq scl sda pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 10/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 [ figure 4 ] connector diagram #1 kdf71g-30s-1h #30 #1 #30 #1 53261 #15 #1 #15 rear view of lcm signal connector(30pins) is left side and power connector(15pins) is right side notes: 1. all gnd(ground) pins should be connected together and should also be connected to the lcd s metal frame. 2. all power input pins should be connected together. 3. all nc pins should be separated from other signal or power. pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 11/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 3-2-3. inverter connector for backlight the inverter connector is s14b-ph-sm3(manufactured by jst) or equivalent the pin configuration for the 14 pin connector is shown in the table below. table 6. 14pin connector pin configuration (inverter connector) rear view of lcm pcb 14 1 1. connector 1) connector(receptacle) : s14b-pha-sm3 (jst) or equivalent 2) mating connector(plug) : phr14 or its equivalent on : 2.0v~5.0v off : 0.0~0.8v bl on/off control signal v on 12 no connection vs 11 power ground gnd 10 power supply, +24v v bl 3 power supply, +24v v bl 2 power supply, +24v v bl 5 power supply, +24v v bl 4 power ground gnd 7 power ground gnd 6 power ground gnd 9 power ground gnd 8 normal =0~0.8v abnormal= 3.0~5.0v lamp operating status status 14 max3.3v/min0.0v pwm dimming control signal v br 13 power supply, +24v v bl 1 notes description symbol pin pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 12/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 3-3. signal timing specifications this is the signal timing required at the input of the tmds transmitter. all of the interface signal timing should be satisfied with the following specifications for it s proper operation. 16.68 16.68 16.68 t vp period us 10.13 10.13 10.13 t hp period khz t clk 32 32 32 t wh width t hp t wv + tv bp + t vfp 46 46 46 - vertical blank 2 2 2 t vfp vertical front porch 38 38 38 t vbp vertical back porch 1600 1600 1600 t v v vertical valid t clk t hp symbol 80 80 80 t hbp horizontal back porch 48 48 48 t hfp horizontal front porch t wh + t hbp + t hfp 160 160 160 - horizontal blank hz 59.97 59.97 59.97 f v frequency 6 6 6 t wv width 98.71 98.71 98.71 f h frequency t clk 2720 2720 2720 t ht width-total hsync t hp 1646 1646 1646 t vt width-total vsync 2560 2560 2560 t hv horizontal valid data enable 268.5 / 2 (dual) mhz (135.25) 134.25 (133.25) f clk frequency ns 7.45 7.45 7.45 t clk period dclk note unit max typ min item table 7. timing table 1 ( dual mode: 2560x1600 dual mode: 2560x1600) ps on : high note: hsync period and hsync width-active should be even number times of t clk . if thevalue is odd number times of t clk , display control signal can be asynchronous.in order tooperate this lcm a hsync, vsyn, and de(data enable) signals should be used. 1. : the performance of the electro-optical characteristics may be influenced by variance of the vertical refresh rates. 2. vsync and hsync should be keep the above specification. 3. hsync period, hsync width, and horizontal back porchshould be any times of of character number(8). 4. the polarity of hsync, vsync is not restricted. pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 13/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 table 8. timing table 2 ( single mode: 1280x800 single mode: 1280x800) notes : hsync period and hsync width-active should be even number times of t clk . ifthevalue is odd number times of t clk , display control signal can be asynchronous.in order tooperate this lcm a hsync.,vsync and de(data enable) signals should be used. 1. the performance of the electro-optical characteristics are may be influenced by variance of the vertical refresh rates. 2. vsync, hsync should be keep the above specification. 3. hsync period should be a double number of character(8). 4. the polarity of hsync, vsync is not restricted. ms 16.69 16.69 16.69 t vp period us 20.28 20.28 20.28 t hp period khz t clk 32 32 32 t wh width t hp t wv + tv bp + t vfp 23 23 23 - vertical blank 2 2 2 t vfp vertical front porch 15 15 15 t vbp vertical back porch 800 800 800 t v v vertical valid t clk t hp symbol 80 80 80 t hbp horizontal back porch 48 48 48 t hfp horizontal front porch t wh + t hbp + t hfp 160 160 160 - horizontal blank hz 59.91 59.91 59.91 f v frequency 6 6 6 t wv width 49.31 49.31 49.31 f h frequency t clk 1440 1440 1440 t hp width-total hsync t hp 823 823 823 t vt width-total vsync 1280 1280 1280 t hv horizontal valid data enable single mhz (72.00) 71.00 (70.00) f clk frequency ns 14.08 14.08 14.08 t clk period dclk note unit max typ min item ps on : low pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 14/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 0.7vcc 0.3vcc t clk invalid data valid data invalid data de(data enable) 0.5 vcc t hp t hbp t hv t hfp t vp t wv t vbp t vv t vfp hsync vsync de(data enable) de(data enable) dclk hsync, vsync, de, data t wh 3-4. signal timing waveforms pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 15/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 3-5. color input data reference the brightness of each primary color (red,green and blue) is based on the 8-bit gray scale data input for the color ; the higher the binary input, the brighter the color. the table below provides a reference for color versus data input. table 9. color data reference pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 16/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 3-6. power sequence for panel table 10. power sequence ms 30 t11 ms 10 t10 ms - 400 t7 ms t6 - t5 ms - 100 t4 ms 10 - t9 - 80 300 - 30 max. notes ms ms ms ms ms units - typ. 50 - - 50 - min. values t2 t1 t3 t6 t8 parameter notes : 1. please avoid floating state of interface signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply for lcd v lcd to 0v. 3. lamp power must be turn on after power supply forlcd and interface signal are valid. interface signal, v i (digital rgb signal, scdt ,v sync , h sync , de, clock to panellink transmitter) power supply for backlight inverter power supply, v lcd pwr_ctrl signal for lcm power down 90% v lcd 90% 10% 10% t9 90% 10% t1 t8 t3 t7 t6 t6 t2 t4 customers can monitor h sync , ,v sync with v lcd on. invalid period ( monitoring h sync , ,v sync ) valid period valid period 0v 0v t5 lamp on lamp off lamp off t3 t4 t5 3.3v eq_data & clock (i2c) refer appendix (page31) t10 t11 pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 17/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 3-6. power sequence for inverter power supply_v bl 90% 10% t4 t1 lamp off lamp on table 11. power sequence t2 t3 lamp on/off lamp dimmer t5 vin_typ 0v vin_dip vin_typ 0.2 vin dipping ms - - 500 t4 ms 10 - - t5 50 - 30 max. notes ms ms ms units - - - typ. - 200 1 min. values t2 t1 t3 parameter v bl 0v pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 18/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 4. optical specification [figure 5] optical characteristic measurement equipment and method (ta=25 2 c, v lcd =18v, f v =60hz, clk=134.25mhz, i out =5.5ma) table 12. optical characteristics optical characteristics are determined after the unit has been on and stable for approximately 30 minutes in a dark environment at 25 c. the values specified are measured at an approximate distance 50cm from the lcd surface at a viewing angle of f and q equal to 0 . figure. 5 presents additional information concerning the measurement equipment and method. tco 99 1.7 - - luminance uniformity (angular dependant) 7 degree - 178 170 q h horizontal general - 178 170 q v vertical vertical horizontal 8 degree - 176 - q gma_h effective - 176 - q gma_v vertical horizontal 6 degree - 176 - q cst_h color shift - 176 - q cst_v 4 ms 12 6 - tr d decay time 5 ms - 8 - t gtg_avr gray to gray 9 2.2 gray scale viewing angle (cr>10) white blue green red (0.665) gy (0.204) gx (0.070) by (0.146) bx 0.329 wy 0.313 wx rise time 5 ms - 17 - t gtg_max (0.324) ry typ +0.03 (0.658) typ -0.03 rx color coordinates [cie1931] 4 ms 12 6 - tr r response time 3 % - - 75 d white luminance variation 2 cd/m 2 300 (240) l wh surface luminance, white 1 notes units 1000 (700) cr contrast ratio max typ min values symbol parameter lcd module optical stage(x,y) pritchard 880 or equivalent 50cm pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 19/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 notes 1. contrast ratio(cr) is defined mathematically as : surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is luminance value at no.1 pointacross the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig 6. 3. the variation in surface luminance , d white is defined as : measuring point for surface luminance & measuring point for luminance variation [figure 6] measure point for luminance (%) 100 ) l .... , l , (l maximum ) l .. , l , minimum(l on9 on2 on1 on9 on2 on1 ? = white d 1 h a b v active area a : h/4 mm b : v/4 mm @ h,v : active area h/10 v/10 2 3 4 7 8 9 5 6 pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 20/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 [figure 7] response time white black t r r t r d 100 90 10 0 optical response black 4. the response time is defined as the following figure and shall be measured by switching the input signal for black and white . response time is the time required for the display to transitionfrom black to white (rise time, t rr) and from white to black (decay time, t rd ). 5. the gray to gray response time is defined as the following figure and shall be measured by switching the input signal for gray to gray . -gray step : 5 step -t gtg_avr is the total average time at rising time and falling time for gray to gray . -t gtg_max is the max time at rising time or falling time for gray to gray . rising time g0 g63 g127 g191 g255 falling time g0 g63 g127 g191 g255 gray to gray pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 21/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 6. color shift is the angle at which the color difference is lower than 0.04. f = 90 (12:00) yu q = 0 z z' yd q f f = 180 (9:00) a f = 0 (3:00) xr f = 270 (6:00) tft lcd module xl -color difference( u v ) 25% box size viewing angle direction -pattern size : 25% box size -viewing angle direction of color shift : horizontal, vertical u = -2x + 12y + 3 4x v = -2x + 12y +3 9y u v = (u 1 -u 2 ) 2 +(v 1 -v 2 ) 2 u 1, v 1 : u v value at viewing angle direction u 2, v 2 : u v value at front( =0) 22 63 110 155 206 240 b 22 63 110 155 206 240 g 22 63 110 155 206 240 r black neutral 3.5 neutral 5 neutral 6.5 neutral 8 white 172 151 36 37 65 145 b 126 62 212 27 148 32 g 35 207 241 197 72 26 r cyan magenta yellow red green blue 29 58 86 87 174 24 b 162 193 39 67 69 104 g 230 160 76 211 56 219 r orange yellow yellow green purple moderate red purplish blue orange 178 185 46 161 123 45 b 199 118 102 112 142 56 g 114 129 77 85 206 98 r bluish green blue flower foliage blue sky light skin dark skin average rgb values in bruce rgb for macbeth chart pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 22/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 8. effective viewing angle is the angle at which the gamma shift of gray scale is lower than 0.3. b r l av l + = ) log( ) log( ) log( a v r l l b + = - here the parameter and relate the signal level v to the luminance l. the gamma we calculate from the log-log representation 7. viewing angle(general) is the angle at which the contrast ratio is greater than 10. table 13. gray scale specification 9. gray scale specification gamma value is approximately 2.2. for more information see table 13. 0.3 0 100 75.4 53.0 35.2 21.2 11.7 4.68 1.2 255 223 191 159 127 95 63 31 relative luminance [%] (typ.) gray level 10. tco 99 item regarding display characteristic is satisfied. pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 23/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 5. mechanical characteristics table 14. mechanical characteristics 400.8 mm vertical hard coating(3h) anti-glare(13%) treatment of the front polarizer surface treatment 5100g (typ.), 5400g (max.) weight 405.80 mm vertical 436.80 mm vertical 42.30 mm depth 641.28 mm horizontal active display area 646.30 mm horizontal bezel area 677.30 mm horizontal outline dimension notes : please refer to a mechanic drawing in terms of toleranceat the next page. the contents provide general mechanical characteristics. in addition the figures in the next page are detailed mechanical drawing of the lcd. pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 24/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 25/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 26/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 6. reliability environment test condition wave form : random vibration level : 1.0g rms bandwidth : 10-500hz duration : x,y,z, 10 min one time each direction vibration test (non-operating) 5 0 -10,000 feet(3048m) 0 -40,000 feet(12,192m) altitude operating storage / shipment 7 shock level : 100g waveform : half sine wave, 2ms direction : x, y, z one time each direction shock test (non-operating) 6 ta= 0 c 240h low temperature operation test 4 ta= 50 c 50%rh 240h high temperature operation test 3 ta= -20 c 240h low temperature storage test 2 ta= 60 c 240h high temperature storage test 1 no test item condition pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 27/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 7. international standards 7-1. safety a) ul 60950-1:2003, first edition, underwriters laboratories, inc., standard for safety of information technology equipment. b) can/csa c22.2, no. 60950-1-03 1 st ed. april 1, 2003, canadian standards association, standard for safety of information technology equipment. c) en 60950-1:2001, first edition, european committee for electrotechnicalstandardization(cenelec) european standard for safety of information technology equipment. 7-2. emc a) ansi c63.4 methods of measurement of radio-noise emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. american national standards institute(ansi), 1992 b) c.i.s.p.r. limits and methods of measurement of radio interface characteristics of information technology equipment. international special committee on radio interference. c) en 55022 limits and methods of measurement of radio interface characteristics of information technology equipment. european committee for electrotechnicalstandardization.(cenelec), 1998 ( including a1: 2000 ) pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 28/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 8. packing 8-1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan b) location of lot mark serial no. is printed on the label. the label is attached to thebackside of the lcd module. this is subject to change without prior notice. 8-2. packing form a) package quantity in one box : 5 pcs b) box size : 781mm x 505mm x 602mm. pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 29/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 9. precautions please pay attention to the following when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes (refer 26~27 page) (2) you should consider the mounting structure so that uneven force(ex. twisted stress) is not applied to the module. and the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) please attach a transparent protective plate to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not describe because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass,tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are determined to the polarizer.) (7) when the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possible. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage: v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperature change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a long time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimized the interference. (7) please do not give any mechanical and/or acoustical impact to lcm. otherwise, lcm can not be operated its full characteristics perfectly. (8) a screw which is fastened up the steels should be a machine screw (if not, it causes metal foreign material and deal lcm a fatal blow) (9) please do not set lcd on its edge. pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 30/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wrist band etc. and don t touch interface pin directly. 9-3. electrostatic discharge control strong light exposure causes degradation of polarizer and color filter. 9-4. precautions for strong light exposure when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. 9-5. storage (1) the protection film is attached to the bezel with a small masking tape. when the protection film is peeled off, static electricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the protection film is peeled off. (3) you can remove the glue easily. when the glue remains on thebezel or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precautions for protection film pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 31/31 lm300wq3 liquid crystal display ver. 0.1 oct 11, 2006 1 remark 06 06 reg0e 65 61 reg0d 53 22 23 00~0f slave(0x7a) 5b 22 23 00~0f master(0x78) reg0a reg09 reg0b reg0f register table 1. equalizer data notes : 1. reg09 is related to tmds noise (galaxy noise), this value must be set to be minimum noise condition. default value is 0x07. appendix pdf created with pdffactory pro trial version www.pdffactory.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LM300WQ3-STA1

	To Download LM300WQ3-STA1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .